Bicycles & Accessories
At the heart of Charlie's Freewheels shop is the sale of used bikes that have been reconditioned by the combined wizardry of our staff. We guarantee the bikes we sell by tuning them up, replacing all cables, drive train and any other parts that are needed. It is our goal to help you find the best possible bike for your needs and your budget.
We don't want to sell you a bike over the web. We want you to come in and checkout a few models, so that we can make sure you have the right size and that the bicycle will do what you need it to do.
We don't just recommend a test ride before you buy, we insist on it. It's only when you ride the bike that you can make decisions about the size and the setup.
Take a look through our bike gallery for something the peaks your interest. At this time we only accept cash, but hope to incorporate debit into our pay system in the coming weeks.
Basic 35 Point Tune $40
- Look at tune-up card & note any special areas or parts to be replaced
- Remove back wheel & spray down rear triangle. Wipe clean
- Check spin of freewheel – if it's gummy/gritty, remove & lubricate. If it's a cassette, tighten lockring
- Check rear wheel hub adjustment
- Degunk free wheel or cassette if necessary
- Check true of rear wheel
- Wipe down rear wheel
- Pump rear tire to desired pressure
- Clean jockey wheels & tighten derailleur wheel nuts
- Install rear wheel
- Inspect derailleur cable & housing, replace if frayed/rusty/cracked
- Adjust rear brakes
- Adjust rear derailleur
- Use degreaser on the chain if it's gunky, then wipe off & oil chain
- Tighten seat binding bolt & nuts on seat clamp
- Drip oil into seat tube
- Oil any bolts that go into the frame
- Tighten rack bolts
- Tighten crank bolts
- Adjust front derailleur
- Tighten front derailleur cable in binding bolt
- Tighten front derailleur binding bolt
- Check bottom bracket tightness, adjust if necessary
- Tighten stem bolts
- Make sure brake levers & gear changers are at 45° angle
- Tighten binding bolts on brake levers & gear changers
- Drip oil down stem
- Remove front wheel & clean fork
- Check true of front wheel
- Check & adjust front hub if necessary
- Wipe down front wheel
- Reinstall front wheel
- Pump up front tire to desired pressure
- Adjust front brakes
- Check headset, adjust if necessary
For repairs our hourly shop rate is $40. Bring in your bike and we can give you an estimate of what a repair will cost. If your bike needs more work than expected we will give you a call before we go ahead.



